Sport nets - Ice hockey
Dimensions: width 1,83m, height 1,22m, upper and bottom depth 0,60m/1,12m
Basic composition: ice-hockey nets are made of polyamide knotless netting, white colour, thickness 4 mm / mesh of size 40 x 40 mm, thickness 5 mm / mesh of size 30 x 30 mm.
Goal nets are stiffened all around by polypropylene tape and over-locked. Ice-hockey goal nets are attached to goal construction by lacing of braided cord of diameter 5 mm.
Ice-hockey goal net Canada STANDARD
- this type is intended for middle to heavy charge, for clubs competitions
Dimensions: width 1.83 m, height 1.22 m, upper and bottom depth 0.60 m/1.12 m
Composition: white polyamide knotless netting, thickness 4 mm,
square mesh 40 x 40 mm
Ice-hockey goal net Canada LEAGUE
- this type is intended for heavy charge, for clubs and international competitions
Dimensions: width 1.83 m, height 1.22 m, upper and bottom depth 0.60 m/1.12 m
Composition: white polyamide knotless netting, thickness 5 mm,
square mesh 30 x 30 mm
ZFlap for Ice-hockey goal net Canada STANDARD
- it serves for shock damping of the puck into the self goal net
- the goal flap prolongs durability of goal net. It is not used in goal nets for competitions.
Dimensions: width 1.83 m, height 1.22 m
Composition: white polyamide knotless netting, thickness 4 mm,
square mesh 40 x 40 mm
Protectors of ice-hockey goal post against puck ricochet
Protectors are made of robust PVC coated canvas, white colour. They are resist to damage and perforation.
Protectors are located inside the goal construction of outside edge of the net.
Protectors serve for shock damping of the puck inside the goal construction and protect the goal net.
Protectors are installed in following way - the metallic prop is wrapped into the protector and canvas loops in backside are run through by enclosed cord. This cord is tighten and fixed to the goal construction.
Protector of back vertical post
- is designed for protection of inner part of back vertical post
Dimension: width 0.30 m, height 1.5 m
Composition: Protectors are made of robust PVC coated canvas, white colour, inner filling for absorbing the shock. Edges of the protector are provided with metal eyelets and the braided cord to tie the protector up the goal construction.
Protector of upper back bend and upper horizontal post
- is designed for protection of inner part of back horizontal post
Protector of inner upper post - two pieces
Dimension: length 0.23 m, height 1.15 m
CProtector of inner middle post - one piece
Dimension: length 0.23 m, height 0.40 m
Composition: Protectors are made of robust PVC coated canvas, white colour, inner filling for absorbing the shock. Upper edge of protector is provided with metal eyelets and braided cord to tie protector up the goal construction.
Protector of bottom inner horizontal post
- is designed for protection of inner part of bottom horizontal post of the goal
Dimension: length 3.90 m, height 0.15 m
Composition: Protectors are made of robust PVC coated canvas, white colour, inner filling for absorbing the shock. Upper edge of protector is provided with metal eyelets and braided cord to tie protector up the goal construction.
Installation: put protector to inner part of back horizontal goal post and lace the rope into metal eyelets and tie the cord to the round (wire) border of the goal post. Install protector after the hanging the net to goal post.
Protector of bottom outer horizontal post
- is designed for protection of outer part of the net close to the ice.
Dimension: length 0.23 m, height 3.85 m
Composition: Protectors are made of robust PVC coated canvas, white colour, inner filling for absorbing the shock. Upper edge of protector is provided with metal eyelets and braided cord to tie protector up to the outer part of the goal construction.
Installation: put protector to outer part of back horizontal goal post and fix by the rope through metal eyelets to the net. Install protector after the hanging the net to goal post.
