Industrial netting

Safety netting

PERSONNEL FALL PROTECTION NETTING

S Type personell & debris fall protection netting with peripheral rope

These nets can be used for construction and assembly work or the construction of halls and bridges - to provide a safety or fall protection against the fall of personnel or objects from scaffoldings - or for the construction of tunnels to provide an effective and affordable solution of personnel fall from heights. Using this netting, you can also secure vast areas under hall roofs, bridges etc.
Their advantage for all kinds of work is a great personnel mobility around the area protected by fall protection netting.
And there is also another advantage: Our netting allows for a great deformation (thanks to its elastic deformation) and so the fall of a person falling into our fall protection netting is soft and gradual.

Installation

To ensure proper functionality of personnel fall protection netting, it is necessary to install them properly and to do a check in specified intervals ( once a year). Netting comes with a net installation manual, safety wire rope to securely fix the peripheral rope to appropriate support and with net samples for testing laboratory.

tech22m.jpg, 29kB tech23m.jpg, 22kB
Identification

“S” Type fall protection netting with peripheral rope - A1 pattern with a square mesh up to 60 mm
“S” Type fall protection netting with peripheral rope - A2 pattern with a diamond-shaped mesh up to 60 mm
“K” Type rope - peripheral rope that comes through all outer net border eyelets. This rope defines netting size.

tech24m.jpg, 46kB
Material

PA 40/4 polyamide, mesh size 40 mm, material thickness 4 mm, white
PP45/5 polypropylene, mesh size 45 mm, material thickness 5 mm
Rope diameter: 10 mm
Fall protection netting complies with EN1263-1.

Dimensions

Fall protection netting is custom-made to customer specification.
The minimal recommended net size is 35 m2.
The minimal shorter side size must be at least 5 meters.

Complete delivery

Upon request we can also provide you with all necessary hanging accessories (snap-hooks, steel-wire ropes, clamps) and recommended hanging procedure. If your net is installed properly, it can significantly extend its life expectancy.


Debris nets for protection against falling objects (stones)

Debris nets help you avoiding accidents

Protection against falling objects during reconstruction or repair works
Protection of surrounding areas against debris fall (for towers, cornices or bridges)

Debris nets help you avoiding accidents - they protect public areas, roads, pavements, open and enclosed spaces against the fall of stones, plaster, old wall facing etc.
A wide range of netting is used according to its field of use.
You can also combine various netting types and to stack them on top of each other. (You can combine high-strength 40-mm mesh netting with higher-density meshes or with high-density raschel knitted fabric.)
The perimeter of nets is reinforced with a carrying cable that is sewn into the netting.
The netting can be provided with anchoring points - loops, eye rings, sewn loops or with other anchoring systems.

Upon request nets can be delivered with complete hanging accessories (snap-hooks, steel-wire ropes, clamps etc.) and with recommended hanging procedures manual.

We produce also atypical size nets.

tech25m.jpg, 76kB

tech26m.jpg, 51kB tech27m.jpg, 31kB

tech28m.jpg, 49kB tech29m.jpg, 30kB
tech30m.jpg, 28kB tech31m.jpg, 36kB

Material

MaterialMesh/thickness (mm)Weight/m2Colour
Polyethylene20/2White
Polyethylene40/4White
Polyethylene45/5Green
Polyethylene70% shadingGreen

Hanging accessories

MaterialThickness (mm)Weight/m (pc)Strength (kN)MaterialThickness (mm) Weight/m (pc)Strength (kN)
Knitted rope6  Spun rope6  
Knitted rope8  Spun rope8  
Knitted rope10  Spun rope10  
Knitted rope12  Spun rope12  
Knitted rope14  Spun rope14  

tech32m.jpg, 10kB tech33m.jpg, 8,9kB tech34m.jpg, 12kB